|
|
|
|
GENERAL: ALUMINUM SHOWER ENCLOSURES SHALL BE AS MANUFACTURED BY STYLE-RITE OF AMERICA®, INC., CLIFTON, NJ. GLAZING: ALL ENCLOSURES ARE GLAZED WITH SAFETY TEMPERED OR SAFETY LAMINATED GLASS CONFORMING TO THE ANSI Z97.1 SPECIFICATIONS. CONSTRUCTION: ALL PANELS SHALL BE CONSTRUCTED OF EXTRUDED FRAMES WITH OVERALL DIMENSIONS AS FOLLOWS: 5/8” WIDE X 1 3/8” DEEP WITH 45° MITERED CORNERS FASTENED WITH STAINLESS STEEL MACHINE SCREWS AND HEAVY CORNER KEYS. FRAMES SHALL ALLOW A MINIMUM OF 3/8” PENETRATION OF GLASS SET IN EXTRUDED VINYL SPLINE. ALL ROLLING PANELS TO BE PROVIDED WITH ADJUSTABLE OVERHEAD BALL BEARING SUSPENSION, E-TYPE SIDE JAMBS, CLEAN-RITE® OPEN BOTTOM TRACK, ADJUSTABLE ALUMINUM BOTTOM GUIDES WITH TEFLON DISCS, MATCHING TOWEL BARS WITH MATING FINGER GRIPS. ALL HINGED DOORS SHALL HAVE FULL LENGTH MAGNETIC DOOR LOCK, DRIP PAN WITH INTEGRAL VINYL SWEEP, INSIDE AND OUTSIDE PULL HANDLES AND FULL LENGTH 2” KNUCKLED HINGE AS MANUFACTURED BY STYLE-RITE®. (HINGE IS INTEGRAL PART OF EXTRUSION, WITH ALUMINUM ROD JOINING MALE AND FEMALE KNUCKLES TOGETHER, THEREBY ELIMINATING ALL SCREWS AND RIVETS TO SECURE HINGE TO MOLDINGS). MATERIAL: ALL ALUMINUM SHALL BE EXTRUDED 6063 OR 6463 ALLOY WITH T-5 OR T-6 TEMPER. ALL PANEL FASTENERS SHALL BE 410 HARD STAINLESS STEEL. ROLLERS SHALL BE BALL BEARING WITH NYLON OR POLYMER OUTER RACE. FINISH: MOLDINGS ARE POLISHED PRIOR TO BEING BRIGHT DIPPED AND ANODIZED UTILIZING ALCOA R-5 PROCESS. PAINTED FINISHES: SHALL BE OVEN CURED POWDER COATED. TEMPERED GLASS THICKNESS: 5/32”, 3/16”, 1/4”, 3/8”. LAMINATED GLASS: 1/4”.
Duke,â Duchess,â Princess,â Victoriaâ and Clean-Riteâ are registered trademarks of Style-Rite of Americaâ, Inc. |
|
Send mail to info@stylerite.com with questions or comments about this web site.Last Modified: 09/14/2007 |